Makeup Organisers
The light, marble-coloured makeup bridge can be downloaded here thanks to designer Sebastian Porombka. The black powderbox organiser by Rico Hauptmann can be downloaded here.
Hair dryer holder
I printed this GHD hairdryer bracket by David Boyle in black PLA at 0.2mm layer height, and secured it to my dressing table with 3M mounting tape.
Command hooks
These are much deeper than authentic command hooks. To mount them, I use the extra adhesive strips that come with a pack of hooks. The model was designed by user […]
Sunglasses rack
Nespresso Capsule Holder
Printed in four parts in grey PLA for less than a dollar worth of material and three hours in printing time at 0.2mm layer height. Designed by Cynthia Ryskamp-Curler available […]
Doll Coat Hangers
These tiny clothes hangers took just 2 minutes each to print, for a couple of cents worth of material. They were printed in yellow or grey PLA at 0.2mm layer […]
Nintendo 64 Games Stacker
Brains
These cortical models took between 2-6 days to print. The grey hemisphere is life-sized and printing in ‘concrete’ PLA. The blue and red brains are around 20% of the size […]
Custom Headphone Mount
Custom headphone mount. I measured the ledge with digital callipers, created a model in Blender, exported to .stl, sliced the model in Cura for printing at a layer height of […]
Wifi QR Code
This dual extrusion print didn’t turn out perfect, but it scans perfectly on Android and Apple devices. Guests can connect to our Wifi just by opening their phone camera.
Balloon Dog
Balloon Dog is cute, and will look cuter with a lot of colourful buddies. He’s 20cm tall and 25cm long and has already learned a few tricks.
Phone Stand
It’s a strong and sturdy phone stand that you can print at the right size to suit any device. Designed by GoAftens at http://www.thingiverse.com/thing:2120591
Mouse MRI Cradle
This cradle was resin printed and cured under UV light. The resolution is measured in microns, not millimetres like my home printer. Scientific instruments must be detailed and accurate. This […]
Geometric Bowl
This geometric bowl sits in my dressing room and holds miscellaneous items like keys, wallet, sunglasses. It was printed in one continuous layer using Cura’s vase mode in transparent ‘natural’-coloured […]
Glasses Stand
Garbage Can
The desktop garbage can is about 25 cm tall and currently eats the plastic rafts and support structures that are discarded from finished 3d prints. Printed with supports at 0.2mm […]
Soap Dishes
Soap dishes are so simple that you can be creative when customising them. These soap dishes each took less than 2 hours. The circular one was printed in two parts […]
Elephants
Clothing Hangers and Dividers
Very useful additions to my closet. The dividers help organise or separate clothing sections, and the multi hangers save a lot of space. Hanger Dividers were designed by Todd Lowe. […]
Oddish Planter
https://www.thingiverse.com/thing:2016317 by TK Leung Printed at a low resolution of 0.4mm layer height using a 0.8mm print core, in blue and green PLA. It had some stringing and blobs of […]
Laptop Stand
Watch Power Stand
https://www.thingiverse.com/thing:3577968 Samsung Galaxy Watch Active Charging Stand by eckerj
Dish Rack
https://www.thingiverse.com/thing:2514576 Dish Strainer – Plates Rack by Jeramie Lim Printed very quickly at low resolution, 0.32mm layer height with a 0.8mm print core, it took 3 hours. I ran out […]
Vases
The large vase is called the Stratum Vase by Hiroaki Nishimura and the small vase is called the Spiral Vase by Eric. Each of these vases were printed in Curas […]
Mount Myoko
Before snowboarding on Mount Myoko in Japan, I 3d printed the mountain. Using map2stl it is easy to convert any location into a topographic map 3d model. I printed this […]
Makeup Palette Stand
Eyeshadow palette holder MINI by Jan Tement at https://www.thingiverse.com/thing:3734609 Took 19 hours at 0.2mm layer height in grey PLA, costing less than $15 in material.
Nintendo Switch Comfort Grip
Nintendo Switch Comfort Grip by Javier Gonzalez Ruiz at https://www.thingiverse.com/thing:2234489 Printed over two hours at 0.2mm layer height without supports in green PLA.
Print Core Holder
Ultimaker Print Core Holder by Alex Martin on Thingiverse: https://www.thingiverse.com/thing:4107928
Controller Stand
Nintendo Switch Pro Controller Display Stand by Owen Morgan Printed in three parts at low resolution, 0.2mm layer height, in black PLA, it took less than an hour. Just snap […]
Headphone Stand
The MakerBot Headphone Stand went through the same design process used in professional design and engineering industries. Multiple design iterations and 3D prints led to the final fully 3D printable […]
Curiosity
Curiosity is a rover that has lived on Mars since 2012. NASA provides its 3d model for free here. Curiosity searches for signs of microbial life or water and monitors […]
Anatomical Hand
This is a model of the skeletal structure of hands based on a CT scan. Its available to download for free here from myminifactory’s Scan the World project: a global […]
USB Organiser
This USB organiser was printed in flexible black plastic to hold 18 USBs, 16 full-sized SD cards and 34 micro SD cards. I’ve also found the micro SD card slots […]
Impossible Table
Tensegrity tables are popular novelties that appear to defy gravity as only the middle string is supporting the weight of the table. This model is called the “Impossible Table” and […]